Standing Seam Roof

discussions on 1001bit tools, bugs and ideas

Standing Seam Roof

Postby cadward » Wed Feb 25, 2009 8:21 pm

Greetings
Thanks for the great tools! I would like to see a ruby that would help make a standing seam roof. Would that be possible

Thanks again for all the effort
cadward
cadward
 
Posts: 5
Joined: Wed Feb 25, 2009 5:20 pm
Location: Mooresville, North Carolina

Re: Standing Seam Roof

Postby GohCH » Thu Feb 26, 2009 12:20 am

hi Cadward, check this out :)
standing_seam_roof.png
standing seam roof created using horizontal groove tool
standing_seam_roof.png (30.07 KiB) Viewed 8480 times


i created this using the horizontal groove tool, with a bit of trick

1) rotate the roof face to stand vertical, i.e. rotate it 90 degrees along y axis.
2) select the faces and run the horizontal grooves tool
3) for extrusion, use negative value for the depth

and you get this with a single click! 8-)
GohCH
 
Posts: 303
Joined: Mon Oct 13, 2008 8:04 am

Re: Standing Seam Roof

Postby jamsog » Wed Oct 07, 2009 9:27 pm

Brilliant
jamsog
 
Posts: 25
Joined: Sun Sep 06, 2009 6:06 pm

Re: Standing Seam Roof

Postby GohCH » Sat Feb 20, 2010 2:23 am

hi, another way of creating standing seam roof
i used the roof tool, set the rafters to the size of the seams, uncheck create battens/purlins;
and you can create standing seam roofs automatically is a single click :ugeek:
standing_seam_roof-01.jpg
tiny rafters as standing seams
standing_seam_roof-01.jpg (64.66 KiB) Viewed 7963 times

standing_seam_roof-02.jpg
standing_seam_roof-02.jpg (76.81 KiB) Viewed 7963 times
GohCH
 
Posts: 303
Joined: Mon Oct 13, 2008 8:04 am

Re: Standing Seam Roof

Postby angiebuds » Tue Nov 02, 2010 5:51 pm

No doubt that it is a good start for making a standing seam roof. My dad examined your work and he said that the first one is more effective. It could be a good way to prevent water from stocking.
Last edited by angiebuds on Fri Nov 05, 2010 2:54 pm, edited 2 times in total.
angiebuds
 
Posts: 2
Joined: Tue Nov 02, 2010 12:26 pm

Re: Standing Seam Roof

Postby GohCH » Wed Nov 03, 2010 11:04 am

hi,
we now have a metal decking tool in the Pro version to deal with this ;)
mdeck.jpg
mdeck.jpg (81.03 KiB) Viewed 7637 times

mdeck2.jpg
mdeck2.jpg (48.98 KiB) Viewed 7637 times

mdeck3.jpg
mdeck3.jpg (85.89 KiB) Viewed 7637 times

mdeck4.jpg
mdeck4.jpg (28.64 KiB) Viewed 7637 times

:D
GohCH
 
Posts: 303
Joined: Mon Oct 13, 2008 8:04 am


Return to 1001bit tools

Who is online

Users browsing this forum: No registered users and 1 guest

cron