1001bit language pack

1001bit tools in different languages!

Re: 1001bit language pack

Postby GohCH » Sun Jun 14, 2009 3:35 am

hi everyone!!!
I've made some improvements and added a new revolved surface tool in version 1.1.6 update!
Thanks for your translation for the v1.1.5; would be really grateful if you could continue to support v1.1.6 translation on the revolved surface tool, the file revsurf.txt file is at
http://www.1001bit.com/language_pack/v1.1/en/revsurf.txt

2 new lines need to be added to 1001bitmenu.txt file (anywhere before end>>end>>end)
t39>>Revolved surface>>Revolved surface
st39>>Create revolved surface from selected edges.>>Create revolved surface from selected edges.
Please refer the 1001bitmenu.txt file inside the
http://www.1001bit.com/language_pack/v1.1/en/1001bit_v1.1_language_en_default.zip

also, you can now control the size of the dialog box by adding the following lines (anywhere before end>>end>>end)

dw>>dialog box width>>400
dh>>dialog box height>>500

Thanks and best regards!

Goh C H
GohCH
 
Posts: 303
Joined: Mon Oct 13, 2008 8:04 am

Re: 1001bit language pack

Postby GohCH » Sun Jun 14, 2009 2:38 pm

A very important note on the language files;
the last line
end>>end>>end
MUST be followed with at least a carriage return (ENTER).
The translation file will cause an error if the last line is not complete with an enter.
GohCH
 
Posts: 303
Joined: Mon Oct 13, 2008 8:04 am

Re: 1001bit language pack

Postby GohCH » Fri Dec 25, 2009 3:34 am

hi everyone,
Merry Christmas!!!
Anyone interested to add the translation for version 1.1.7 can download the new files from below:

For new translation please download the complete files:
1001bit(1.1.7)-language-full.zip
full language files for 1001bit version 1.1.7
(17.18 KiB) Downloaded 1085 times


Upgrade from version 1.1.6, please download and add the following files into your existing language folder:
1001bit(1.1.7)-language-upgrade.zip
upgrade from v1.1.6
(2.57 KiB) Downloaded 930 times

extrude2.txt
rgrille.txt
cgrille.txt

as for the 1001bitmenu.txt; do not replace your current 1001bitmenu.txt file.
edit the 1001bitmenu.txt file with a text editor(eg. notepad), and add/paste the following lines into the file
(after the line starting with st39>>..... before the line sm1>>....)
1001bit-lang-v1.1.7.jpg
1001bit-lang-v1.1.7.jpg (340.15 KiB) Viewed 10291 times


t40>>Extrude taper>>Extrude taper
st40>>Extrude selected profile (maintain taper).>>Extrude selected profile (maintain taper).
t41>>Rectangular grille>>Rectangular grille
st41>>Create rectangular grille from edges>>Create rectangular grille from edges
t42>>Tubular grille>>Tubular grille
st42>>Create tubular grille from edges>>Create tubular grille from edges

a sample 1001bitmenu.txt file is included in the zip for convenience.

Have fun! and wishing everyone prosperity and good health in the new year ahead!
GohCH
 
Posts: 303
Joined: Mon Oct 13, 2008 8:04 am

Previous

Return to Language packs

Who is online

Users browsing this forum: No registered users and 1 guest

cron